Ceramic or porcelain tile flooring is very durable and a great investment in your home. Tiles will last forever if they are taken care of, and practically never wear out.
When you are getting ready to install the tile flooring you will need to get the ceramic or porcelain tiles, cement backer board, tile nippers, sponges, tape measure, knee pads, tile cutter or tile saw, grout, square, rubber float, chalk line, lots of water, eye protection, thin set, buckets, hammer, notched trowel, and nails.
You will need to remove all the molding and base boards. Remove any existing floor coverings, carpet, or wooden floors. Clean the sub floor making sure it is free of dust and debris.
Make sure the floor is sturdy and stable. Install cement backer board onto the stabilized floor and at every floor joist screw the backer board in with 2-inch galvanized screws. The old flooring will need to be disposed of, and most garbage services do not pick up such items. The old flooring will need to be taken to the garbage dump. Most dumps charge a fee for the use of their services, so make sure to make the trip worthwhile.Get the right service information from http://www.theflooringlady.com/
If a certified installer had been hired, they would have removed all of the trim, flooring, and done the cleanup. They would also have disposed of the old flooring and any other debris, saving the resident the …
Raring to start working on your own ceramic floor tile project? Get ready to learn the basics of how to lay ceramic floor tile right here and make that beautiful ceramic tile floor that you and your family have always wanted! So, get your tiling tools ready, put on your safety goggles and let’s do some tiling!Read top Article!
Most tiling jobs start with a well-prepared subfloor. As you learn more about how to lay ceramic floor tile, you will find out about the three general types of floors that tile installers often work with. Such information will help you a lot along the way.
Generally, you will encounter three types of subfloors: Vinyl, plywood, and concrete floors. Installing ceramic tiles directly to vinyl or linoleum floors (or subfloor surfaces) should be avoided at all costs. Your vinyl or linoleum flooring may contain asbestos fibers and should be tested first before you try removing it. If your vinyl floor covering does not contain asbestos fibers, a general recommendation on how to lay ceramic floor tile is to rough-sand, or scarify, the vinyl floor surface to provide your tiling mortar a better grip. Use a latex modified thinnest mortar to install your ceramic tiles over your vinyl subfloor.
Working over plywood subfloors can be very tricky, as well. Like vinyl floor surfaces, it is not advisable to install your ceramic tiles directly on to your plywood floor surface. Plywood flooring …